Vantage View

The Basics

Imagine a console that can provide you with a complete view of your vehicle’s performance. Livorsi’s Vantage View® does just that.

Vantage View® instruments display real-time performance data and compiles the information into one gauge- the Master Tach. This tachometer features an analog RPM readout with a built-in LCD screen that displays all the information your engine’s ECM provides.

Vantage View® is designed to work with any SmartCraft®, NMEA 2000®, J1939 or GM MEFI engine. The Master Tach drives optional slave gauges such as a speedometer, fuel level, oil pressure or volts, that display the same real time data, but through the familiar styling of an analog readout.

Installation is made simple with the use of plug-in Deutch connectors. The Master Tach and its master harness wires directly to the vehicle’s ECM; eliminating the use of a translation box or oversized harnesses.

Navigation and set up of the Master Tach is possible through a remotely mounted switch assembly. OEMs and do-it-yourselfers have the freedom to install the switches in a place convenient for the operator.

While these instruments are digital, they were designed with the traditional styling of analog gauges. All Vantage View® gauges utilize 270° digital stepper motors that accurately display data in real time. Fluorescent pointers and large bold graphics make these instruments easy to ready at a glance.

Livorsi Vantage View® gauges give you a complete understanding of your vehicle's performance, stress free installation and the freedom to ‘custom build’ your own look with several color options. Vantage View® is the next generation of instruments combining modern technology and infusing it with timeless design.

Combine Vantage View® with the Data Gateway and Garmin GPSMAP® for the ultimate hi-tech dash.
  • Digital stepper motors
  • Large highly visible graphics
  • Non-fading fluorescent pointers
  • Red LED backlighting
  • User programmable alarms
  • Mix & match sizes
  • Installation made easy with plug-in harnesses

  • Sizes:
  • Standard sizes: 3 3/8" & 2 1/8"
  • Oversize:4 5/8" & 2 1/2"
  • VV Switches: two 1/2" cutouts
  • Master harness: 36" in length
Vantage View® Gallery
Part Numbers

Click on the links below to
view & download information

Available in PDF format




If you do not have Adobe Reader, you can download the program by clicking here
The #1 Choice in Performance!