GAUGE ACCESSORIES
 
 
 
PITOT MOUNTS
 
  • Absorbs shock
  •  Pitot blade to springs back
  • Stainless steel construction
  • Knife-like blade for reduced drag
  • Eliminates bent/clogged tubes
  • Cuts through most debris on impact
  • Works with all speedos
Recoil Blade Kick- up Assembly  RBM2A  $223
Recoil Blade Kick- up Assembly Race  RBM2AR  $233
5" Pitot Recoil Blade  GCRB $50
1/4" ID hose blade fitting  GCF8  $7
1/8" ID hose blade fitting   GCPM1/8  $5
Standard Springs  SS  $17
Race Springs  RS  $17
 
 *Specify hose fitting size, 1/8” or 1/4” inside diameter (ID)
 
 
  • Stainless steel blade mount
  • Knife-like blade strength
  • Cuts through most debris on impact
  • Photo shows options 90º fitting for low profile stepped hull mounts
  • Thru-hull fitting needed on stepped bottoms

Regular  GCRB1A $91
90°  GCRB1A90  $98 
90° pitot tube x 1/4" ID,
push lock
GCF7  $14 



*Specify hose fitting size, 1/8” or 1/4” inside diameter (ID)
top 
 
  • Stainless steel pitot blade mount
  • Fully adjustable tube height
  • Unique patented design
  • Improves accuracy of speedo
  • Self align pitot tube minimizeS tube bending & breakage
  • Assembly included with speedo kits
Pitot Tube Assembly  GCM1A $67
Pitot Blade Assembly  GCRB1A  $ 91
Pitot Tube Assembly
Mercury bolt pattern 
GCM2A  $67



*Specify hose fitting size, 1/8” or 1/4” inside diameter (ID)
 
 
KICK UP MOUNT ASSEMBLY



 
  • Stainless steel kick-up tube & mount
  • Perfect for bass & ski boats
  • Interchangeable with all other speedos
  • Improves accuracy of current speedo
  • Not recommended for speeds in excess of 80 mph
1/4" ID hose  GLM1A $73 
1/8" ID hose  GLM1A1/8  $73 
 
top 
 
  • All stainless steel
  • Mercury race bolt pattern
  • Reverse mounts in the engine water pick-up
Mount with fittings  GLRMA $66 
Mount with out fittings  GLRM  $66
 
 
 
PITOT TUBES
(variety)



 
Standard 7" GCT1 $19 
Blade 5" for GCRB1A/RBM2A  GCRB  $50 
Blade 5" for RBM2A GCRBR $50
Kick up tube 5" for GLM1A  GCT1K  $ 29
Low Resistance Tube
for personal watercraft
GCPW  $19 
 
top 
 
THRU HULL FITTINGS

 

  • Stainless steel
  • Mounting of speedo kick-ups on stepped hulls, leaves no exposed hose
  • Use for water discharge or external steering systems
  • Clean professional installation

2" x 1/8" NPT  THF218 $24 
4" x 1/8" NPT THF418  $66 
90° fitting
1/8" NPT
male push lock x
1/4" ID push lock
 
GCF6  $7
 
 
 
PITOT MOUNTS

 
Tube or Blade Mount  GCM3 $48 
Tube or Blade Mount
Mercury race bolt pattern 
GCM2  $48 
 
 
GAUGE ACCESSORIES 
     
GPS Antenna Only 
Standard size- 3 ring terminal  GPSRA  $315 
     
Dual Application Harness-
for two GPS gauges- & one antenna 
GPSARAD $336
     
Smartcraft™  GPS antenna/receiver  SCGPSRA $296
GPS Plug  GPSP $19
     
Recall Switch  Black with Black plate GPSRSBK  $29
Recall Switch  White with White plate GPSRSW  $29 
     
GPS Spacer Black  GPSSBK * $11
GPS Spacer White GPSSW * $ 11
     
Flat GPS Bezel  FLGPS + color  $40
Hose Kit- for mechanical gauges only HK $29
 
*NOTE: 3 5/8" & 4" cutouts convert to 3 3/8" cutouts with GPS Spacers.
 
MONSTER GAUGE ACCESSORIES 
     
Monster GPS SPEEDOS 
GPS Antenna- molex connector GPSARA  $315 
Dual GPS Antenna- 2 molex connectors GPSARAD  $336
     
Liquid Speedo hose- push on 1/4" ID  GCH1/4  $2
 
Dry Speedo- LMSGDS 
 Speedo hose- push on 1/8" ID GCH1/8  $1 
Pitot Mount Assembly 1/8"  GCM1A1/8  $60
     
Memory Tach Recall Box - black switch plate MTRBK  $149
Memory Tach Recall Box - white switch plate  MTRW  $149
     
Mechanical Fuel Pressure
hose 1/4" ID, 5/8' OD GCFH1/4  $2 
1/8" NPT Female to 1/4" push on Male, brass- gauge end GCF4 $3
1/8" NPT Male to 1/4" push on Female, brass- engine end GCF5  $3
 
 
 


<< previous page
 

 

Home  |  About Livorsi Marine  |  Tech Tools  |  FAQ  |  Products  |  Related Sites  |  Contact Us

 Livorsi Marine Inc. 715 Center St. Grayslake, IL 60030  sales@livorsi.com

Copyright © 2005 Livorsi Marine, Inc.  All Rights Reserved.