 |
The Basics
GPS speedos work hand in hand with antennas that receive satellite signals to determine speed over land. This system can be interfaced with GPS plotters and fish finders.
GPS speedometers are more accurate than a regular speedometers that use a pitot tube to determine speed.
Plus there's no need to calibrate for wind current.
FYI- Antenna Location
- Antenna should be located in clear unobstructed view of satellite
- Antenna should be mounted flat or level with the horizon, top side facing up
- Fasten the receiver/antenna down with silicone or 4200/5200 or 2-sided tape
- The differences in dash or deck thickness and denseness can only be determined by temporarily mounting the receiver/antenna at the desired
location and trying it- the receiver/antenna will not receive signals through metal, it will receive signals through glass and plexi windshields- but try to keep it away from any aluminum or stainless frames.
Product Index
|
Gauge Styles
Mega & Race Series |
|
Options Available
|
|
Industrial Series |
|
Options Available
|
Waterproof Series |
|
Options Available
- Standard size cutout- 3 3/8"
- 3 dial color to choose from
- 10 rim color options
- Waterproof Webpage
|
|
Electronic GPS Speedo w/ Odometer |
|
Options Available
- Standard size cutout- 3 3/8"
- 3 dial colors
- 10 rim color options
- Sold as a kit, includes: 120 MPH gauge, pulse generator, switch and antenna
- Electronic GPS Speedo webpage
|
|
Vantage View |
top
|
Options Available
- This speedometer will only work with the Vantage View system.
- Standard or Over size cutouts
- 2 dial colors (100 MPH and 160 MPH also available in a black dial)
- 10 rim color options
- Vantage View webpage
|
GPS Accessories
|
GPS antenna for Mega & Race and Waterproof Series
|
Part Number: GPSRANB
|
| GPS Antenna for Vantage View |
Part Number: GPSRANBVV |
| GPS Recall Switch- black |
Part Number: GPSRSBK |
| GPS Recall Switch- white |
Part Number: GPSRSW |
| Flat bezel for GPS Antenna or GPS Recall Switch |
Part Number: FLGPSRS+ color |
Flat GPS Adapter bezel-
converts a 3 5/8" or a 4" cutout into
3 3/8" |
Part Number: FLGPS+ color |
|
|
|
Standard Equipment in:
|
