-
$96.40
Polished stainless red LED navigation light – LEDNL3R
Add to CartLivorsi Marine red (port side) LED navigation lights provide exceptional visibility and durability, ensuring safe navigation under various water conditions. Utilizing advanced LED technology, these lights deliver bright, crisp illumination while consuming minimal power. The energy-efficient LEDs offer a reliable …
-
$96.40
Polished stainless green LED navigation light – LEDNL3G
Add to CartLivorsi Marine green (starboard side) LED navigation lights offer exceptional visibility and durability, ensuring safe navigation in various water conditions. Crafted using advanced LED technology, Livorsi Marine lights deliver bright, crisp illumination while consuming minimal power. The energy-efficient LEDs provide …
-
$1,350.00
Two lever, billet short handles, one throttle, one shift for Mercury DTS engines – DTSXBS11
Select optionsIntroducing Livorsi Marine’s New QR Series™ Throttles (Quick Response) designed specifically for Mercury Marine’s DTS compatible engines. The shorter levers make this control great for tight dash spaces and allow for quicker response time. These ergonomically designed knobs are very …
-
$77.50
Sewn QR cleat with red line – QRSLFBR000048RD
Add to CartThis easy-to-use QR fender cleat has a fender line permanently sewn to our QRTFB-NL quick-release fender cleat. It also has 4 feet of American-made, red solid braid polypropylene rope so you can easily adjust the height of your fender. Not included …
-
$77.50
Sewn QR cleat with blue line – QRSLFBR000048BL
Add to CartThis easy-to-use QR fender cleat has a fender line permanently sewn to our QRTFB-NL quick-release fender cleat. It also has 4 feet of American-made, blue solid braid polypropylene rope so you can easily adjust the height of your fender. Not included …
-
$77.50
Sewn QR cleat with platinum line – QRSLFBR000048PL
Add to CartThis easy-to-use QR fender cleat has a fender line permanently sewn to our QRTFB-NL quick-release fender cleat. It also has 4 feet of American-made, platinum solid braid polypropylene rope so you can easily adjust the height of your fender. Not included …
-
$77.50
Sewn QR cleat with black line – QRSLFBR000048BK
Add to CartThis easy-to-use QR fender cleat has a fender line permanently sewn to our QRTFB-NL quick-release fender cleat. It also has 4 feet of American-made, black solid braid polypropylene rope so you can easily adjust the height of your fender. Not included …
-
$150.00
Sewn QR fender cleat with blue line and large fender – QRFB027BL215182
Add to CartNew Livorsi sewn Quick Release (QR) fender cleats make docking and tie-up effortless. Our lines are 48″ long, and when used with our hole in the middle, made in the USA fenders, they can be adjusted 20 inches up or down. Simply …
-
$429.00
Silver carbon fiber covered Livorsi Apex wheel with polished stainless spokes – LSWL090500SXL09100
Add to CartThe Livorsi Apex Steering Wheel delivers premium style and performance for serious boaters. Wrapped in silver carbon fiber material for a comfortable, non-slip grip, the Apex is built to perform in all conditions and features platinum colored stitching. It features …
-
$29.30
1/2″ diameter 15 foot long Livorsi dock line – DL1215
Select options This product has multiple variants. The options may be chosen on the product pageThe Livorsi Marine super soft 1/2″ diameter 15-foot long dock line is 100% manufactured in the USA. Sewn at Livorsi Marine with a Livorsi logo badge, this line has an 11″ loop for easy docking. Our dock line is waterproof and resistant to …
-
$4,736.84
Livorsi 1100 tab with electric indication – TTK1100EL
Select options This product has multiple variants. The options may be chosen on the product pageUpgrade your boat’s performance with the Livorsi Marine 1100EL Hydraulic Trim Tab, designed for larger boats that need serious attitude adjustment.
The 1100EL features a 24″ long, 15″ wide tab, providing 360 square inches of surface area for enhanced stability and control. …
-
$4,736.84
Livorsi 1050 trim tab kit with 12″ transom plate and electric indication – TTK1050EL
Select options This product has multiple variants. The options may be chosen on the product pageMaximize your boat’s performance with the Livorsi Marine 1050EL Hydraulic Trim Tab, engineered for serious attitude adjustment in compact transom spaces.
The 1050EL features a compact transom plate measuring 12″ wide and 8 ¼” tall, paired with a 22″ long running plate, providing 235 …
-
$45.00
Rocker switch double pole momentary on / off / momentary on black – RSDMFMBK
Add to CartBlack Rocker Switch. MOM ON / OFF / MOM ON. Dust and moisture protected. 20 amps at 12 VDC. 1/4″ Push-on connectors. Snap bracket mounting hole 83″ x 1.450″ cutout.
-
$83.00
Quick release docking cleat – QRTLC2R-L01
Add to CartMade from 316 stainless steel, the Livorsi Marine QR docking cleat can be easily installed anywhere on your boat or dock, where a cleat is needed. With the push of a button, remove the cleat when not needed. This cleat can …
-
$704.75
Single pin quick release short base retractable ladder – QRL4SCLA-N
Add to CartOur versatile ladder is designed for convenience. It easily engages and disengages with Double Action QR Pins, allowing placement anywhere on your boat in multiple locations. It features a four-step extension reaching up to 46 inches for effortless boarding. Crafted from …
-
$21.05
Large blind nut only for large QR bases – QRFLBNWP
Add to CartSpare blind nut for QRBLBWD4-375-L01 and QRBLBWD4L-375-L01
-
$577.63
Single pin quick release retractable ladder – QRL4SCLA
Add to CartOur versatile ladder is designed for convenience. It easily engages and disengages with Double Action QR Pins, allowing placement anywhere on your boat in multiple locations. It features a four-step extension reaching up to 46 inches for effortless boarding. Crafted from …
-
$36.84
Large blind nut install tool kit for large QR bases – QRFLBNIT
Add to CartThis tool is required when installing any of our blind nut/retrofit installations of part numbers QRBLBWD4-375-L01 and QRBLBWD4L-375-L01. It is made from 316 stainless steel and designed specifically for installing Livorsi blind QR fasteners. Only one …
-
$13.16
Quick release fender base bezel – QRFAB
Select options This product has multiple variants. The options may be chosen on the product pageThis quick-release fender cleat base bezel is machined from 6061 aluminum to fit Livorsi part number QRBSB-150. The bezel has an OD of 1.5″, and it’s machined out to 1.265″ for the fender cleat base to sit flush in the bezel. These bezels …
-
$86.81
Quick release dual action large universal RAM mount – QRDALUA-L
Add to CartThis base fits into the QRBLBWD4L-375-L01 anti-rotational QR base and installs easily on any surface. It requires a 1.25″ hole in the boat and access to tighten the bolt for secure installation. Crafted from polished 316 stainless steel, this durable, …
-
$77.89
Anti-rotational quick release base – QRBLBWD4L-375-L01
Add to CartThis polished 316 stainless steel anti-rotational quick-release base is designed for compatibility with the QRTLC2R-L01 quick-release docking cleat, QRDALUA-L quick-release dual-action large universal RAM mount, and the QRL4SCLA single-pin quick-release retractable ladder. It requires a 1.25″ hole for installation and …
-
$71.58
Quick release docking cleat base – QRBLBWD4-375-L01
Add to CartThis polished 316 cleat base works with Livorsi Marine quick-release docking cleat part number QRTLC2R-L0. It requires a 1.25″ hole in the boat and access to tighten the bolt to hold it in place. This cleat is certified to keep a …
-
$147.37
8″ polished stainless pull up cleat – PUC8
Add to CartThese polished stainless 8″ stainless steel pull up cleats feature a mounded base designed to allow water to run off the cleat, eliminating the need for drainage cups or hoses. Made of marine grade 316 alloy these cleats are complete with a …
-
$231.58
8″ pull up billet aluminum Cleat – PUC8HBAN
Add to CartThese polished stainless 8″ stainless steel pull-up cleats feature a mounded base designed to allow water to run off the cleat, eliminating the need for drainage cups or hoses. Made of marine grade 316 alloy, these cleats are complete with a stainless …
About
At Livorsi Marine, we design and manufacture high-performance parts and accessories for all kinds of boats. From weekend cruisers and towboats to military and commercial vessels, our products are built to perform, look sharp, and last in tough marine environments.
Capabilities
Simple things like adding a logo, applying a custom color to design from scratch new products can all be done with the vast resources found at Livorsi Marine.