|
Click on the links below to
view & download information (PDF)
If you do not have Adobe Reader, you can download the program by clicking here
Gauges Available
- Tachometer
- Speedometer
- Boost
- Fuel Level 1
- Oil Level 1
- Oil Pressure
- Oil Temperature
- Trim Drive Port
- Trim Drive Starboard
- Voltmeter
- Water Pressure 30 PSI
- Water Pressure 60 PSI
- Water Temperature (coolant)
- Four Function gauge:
fuel level, oil pressure, water temperature & volts
top
|
Valuable Features
Faults and Warnings
Vantage View® alerts you of Faults and Warnings helping you prevent costly damage to your vehicle or boat. with blinking icons on the Master Tach LCD screen. Faults are a severe problem reported by the ECM/ECU that warrants stopping the engine. Warnings alert you of potential problems as reported by the ECM/ECU.
Programmable Alarms
In addition to factory set fault and warnings, users can program up to 15 alarms to their individual needs. A bright LED warning light illuminates on the corresponding slave gauge when boat or vehicle is operating outside the appointed limits.
A dedicated Fault and Warning Gauge
The new FWA gauge (fault-warning-alarm) allows Vantage View® to receive Faults and Warnings from Cummins Diesel engines, when a Diesel View display is not present. Provides an a MIL, PIL alarm and an audible alarm output with a mute option. (FWA gauge will work on all engine protocols except for Mercury Gas Smartcraft engines)
Popup Alerts
Enabling or popup alerts for faults, warnings or alarms provides a highly visible alert screen when a fault, warning or alarm occurs. Popups may be enabled for engine trim/tabs brings up a trim detail screen when a change in trim position occurs. Vantage View® even displays engine diagnostic codes for J1939.
Sender Inputs
With Vantage View®, users may connect up to three analog senders such as fuel level, engine trim or water pressure. The analog signal is converted to a digital signal for the Master Tach to process.
RPM
LCD displays up to 10,000 RPM, Includes Max RPM recall
Speed
Vantage View® reads both CAN and GPS based speed inputs. If more than one speed source exists, all speed data can be viewed on the Master Tach LCD. Includes Max speed recall.
Fuel Tank and Engine Trim Calibration
The newest feature of the Vantage View® system is the ability to calibrate fuel tank and engine trim, ensuring the upmost accuracy. The Master Tachometer can monitor up to two fuel tanks.
Fuel Management
Fuel consumption, Fuel Rate, Fuel remaining and fuel used can all be monitored with the use of a fuel flow sensor.
Customize Screen Appearance
- Vantage View® lets you program your favorite parameters and their display order, allowing you to view the information most important to you
- Choose between bar graph (shows more detail) or three line format for quick review
- Change the color scheme from white graphics on black background or black graphics on a white background
|
